Expecting to get a good job without studying hard is like expecting to win a marathon without running it.
--Your friends at LectureNotes

Note for Digital Signal Processing - DSP By Lokesh Lodha

  • Digital Signal Processing - DSP
  • Note
  • Uploaded 1 year ago
Lokesh Lodha
Lokesh Lodha
0 User(s)
Download PDFOrder Printed Copy

Share it with your friends

Leave your Comments

Text from page-1

Jaipur National University, Jaipur School of Engineering & Technology Department of Electronics & Communication Sub: DSP&A Assignment-1 Q1. A Continuous time periodic signal with fourier series cofficients Ck = (Β½) |k| a period Tp = 0.1 sec. passes through an ideal ideal low pass filter with cutoff frequency Fc = 102.5 Hz. The resulting signal ya (t) is sampled periodically with T = 0.005 sec. Determine the spectrum of the sequence y(n) = ya (nT). Q2. Consider the sampling of the bandpass signal whose spectrum is illustrated in figure given below. Also determine the minimum sampling rate Fs to avoid aliasing. Q3. A bandlimited continuous-time signal xa (t) is sampled at a sampling frequency Fs β‰₯ 2B. Determine the energy Ed of the resulting discrete-time signal x(n) as a function of the energy of the analog signal, Ea , and the sampling period T = 1/Fs. Q4. Given the eight-point DFT of the sequence 1, 0 ≀ 𝑛 ≀ 3 x (n) = { } 0, 4 ≀ 𝑛 ≀ 7 compute the DFT of the sequences1, 𝑛=0 (a) X1 = { 0, 1 ≀ 𝑛 ≀ 4 } 1, 5 ≀ 𝑛 ≀ 7 0, (b) X1 = {1, 0, 0≀𝑛≀1 2 ≀ 𝑛 ≀ 5} 6≀𝑛≀7 Q5. Compute the 8-point DFT of the sequence 1, 0 ≀ 𝑛 ≀ 7 x (n) = { } 0, π‘‚π‘‘β„Žπ‘’π‘Ÿπ‘€π‘–π‘ π‘’ by using the decimation-in-frequency FFT algorithm described in the text. Q6. Computed the 16-point DFT of the sequence X(n) = cos (Ο€/2) n , 0≀ n ≀ 15

Text from page-2

Using the radix-4 decimation-in-time algorithm. Q7. Determine the order of the analog Butterworth filter that has a (-2) db pass band attenuation at a frequency of 20 rad/sec and atleast (-10) db stop band attenuation at 30 rad/sec. Q8. Consider a Chebychev filter with attenuation not more than 1.0 dB for | w |ο‚£ο€ 1000 rads / s and at least 10 dB for | w |ο‚³ο€ 5000 rads / s. Q9. Let us design a Butterworth LP filter with specifications: Passband amplitude to be within 2.0 dB for frequencies below 0.2Ο€ rad / s and the stopband magnitude to be less than 10 dB for 0. 4Ο€ rad / s ο€ or above. Assume unity gain at D.C. Q10. A non-recursive filter is characterized by the transfer function H(z) =1 + 2z + 3z2+ 4 z3 + 3 z4+ 2 z5+ z6 z6 Find the group delay. ******************

Lecture Notes