×
IT'S TIME TO WORK A LITTLE HARDER.
--Your friends at LectureNotes
Close

Note for Applied Chemistry - CHEM by Dheeru Sharma

  • Applied Chemistry - CHEM
  • Note
  • Dr. A PJ Abdul Kalam Tech University Lucknow - AKTU
  • 19 Views
  • Uploaded 4 months ago
Dheeru Sharma
Dheeru Sharma
0 User(s)
Download PDFOrder Printed Copy

Share it with your friends

Leave your Comments

Text from page-2

Ethylene polymerizes because its functionality is two i.e. bifunctional . (e) Teflon is highly chemical resistant    Teflon has distorted (zigzag) structure in which fluorine atoms get packed tightly around folded carbon chain. Since fluorine is highly electronegative, it leads to very strong attractive forces between the different polymeric chains. Due to tightly packed structure and strong force of attraction, teflon is found to be inert And exceptionally high chemical resistance. Q.2 Write the difference between : (a) Thermoplastic and Thermosetting resin. (b) Addition and condensation Polymers. Ans. Thermoplastic resin 1. Polymers which are softened on heating and hardened on cooling . 2. These are processed by addition polymerization. 3. They are linear polymer chain held together by weak vanderwaal’s forces of attraction. 4. They are generally soluble in some organic solvents. 5. They can be remoulded . 6. They are weak, softened less brittle. 7. Ex: PVC,PE, PMMA, Polystyrene. 8. Structure Thermosetting resin 1.Polymes which once hardened can’t be softened again. 2. These are proceed by condensation polymerization. 3. They are branched or cross-linked polymer. 4. They are generally insoluble in some organic solvents. 5..They can’t be remolded. 6. They are strong, hard and more brittle. 7.Ex:Bakelite Phenolic resin ,Epoxy resin. 8. Structure 2

Text from page-3

Addition polymerization Condensation polymerization 1. Addition polymerization is the reaction 1. In condensation reactions, functional groups between monomers undergo polymerization without elimination of any byproduct. 2. Monomer should be an unsaturated molecule. 3. Usually one type of monomers are involved. 4.It is also known as a chain reaction polymerization . 6. No byproduct is formed. 7. Ex: Polythene, PVC,Teflon etc. of two monomers react together releasing a small molecule to form a polymer. 2. Saturated monomers are participating in condensation reaction. 3. Usually more than one type of monomers are involved . 4. It is also known as a step growth polymerization. 6. Byproducts such as H 2O, NH 3 , HCl etc are formed. 7. Ex: Bakelite, Nylon – 6, 6 etc. Q.3 Explain Isotactic, Syndiotactic andAtactic polymers. Or What do you mean by tacticity. Ans.Tacticity :  The difference in orderly or disorderly arrangement (configuration) ofmolecules or groups in a polymer is called tacticity.  Based on tacticity, there are three types of polymer. (i) Isotactic polymer :- If functional groups are on the same side of the main chain then the polymer is called Isotactic. e.g. Cispolyisoprene( Natural Rubber) (ii) Syndiotactic polymer :- If the functional groups are arranged in alternate fashion around the main chain then the polymer is called syndiotactic. e.g. Transpolyisoprene (Guttapurcha) (iii) Atacticpolymer :- In this type of polymer functional groups are arranged randomly .e.g. Polypropylene. 3

Text from page-4

Q.4 Describe the structure, preparation, properties and uses of following polymers: Terylene, Nylon-66, Nylon-6, Buna-S , Buna-N, and Neoprene. Ans. 1. Terylene or decron or polyethylene tere phthalate (PET) Properties:    Terylene is high crystallinity because of its symmetrical structure and presence of polar groups. It is a good fibrous material and the fiber has high modulus and tensile strength. It is resistant to organic solvent and moisture. Uses: (i) It is used as a blend with cotton and wool in clothing. (ii) It is used for making magnetic recording tapes, bottles for cola drinks, fruit juices etc. 2. Nylon-66: 3. Nylon-6: Properties:     Uses: Nylons have high m.p. and possess high temperature stability. They are resistance to chemicals. They have linear structure in which molecular chains are held together by H -bonds. They are crystalline and has good mechanical properties. 4

Text from page-5

     Nylon 6,6 is used mechanical engineering such as, gears, bearings etc. It is used for making fibers which has wise in making ,socks and carpets etc. Its has application in pharmacy and medicine. It is used for jacketing electrical wire and making hair combs. Nylon 6 is used for making tyre cords. 4. Buna-S: It is obtained by co-polymerization of butadiene and styrene in presence of sodium metal. Properties : • • • • • Uses: • • • • • Artificial elastomers. High load bearing capacity. High abrasión resistance. High resilience. Swells in oils and solvents . Motor tyres. Flexible rubbertoys. Wire& cable insulations Shoe soles. Rubbergloves. 5. Buna-N :It is obtained by copolymerization of butadiene and acrylonitrile in presence of sodium metal. Properties : • Artificial elastomers. • High abrasión resistance. • High resilience. • Excellent resistance to heat, sunlight, oils salts and acids. Uses: • Oil resistant container • Conveyerbelts • Rubbergloves. • Adhesives • Printingrollers 5

Lecture Notes