Time can be your best friend and your worst enemy depending on whether you use it or waste it.
--Your friends at LectureNotes

Note for Ground Improvement Techniques - GIT By TPO Department

  • Ground Improvement Techniques - GIT
  • Note
  • REC Mainpuri - RECM
  • Civil Engineering
  • 1 Offline Downloads
  • Uploaded 8 months ago
0 User(s)
Download PDFOrder Printed Copy

Share it with your friends

Leave your Comments

Text from page-1

Ground Improvement Techniques for Stabilization of Soil for Various Purposes GOPAL MISHRA DEC 8, 2016 The ground can be improved by adapting certain ground improvement techniques. Vibro-compaction increases the density of the soil by using powerful depth vibrators. Vacuum consolidation is used for improving soft soils by using a vacuum pump. • • • • • • • • • • Vibro Compaction Vacuum Consolidation Preloading of soil Soil stabilization by heating or vitrification Ground freezing Vibro-replacement stone columns Mechanically stabilized earth structures Soil nailing Micro-piles Grouting Vibro-Compaction Method of Ground Improvement Preloading method is used to remove pore water over time. Heating is used to form a crystalline or glass product by electric current. Ground freezing converts pore water to ice to increase their combined strength and make them impervious. Vibro-replacement stone columns improve the bearing capacity of soil whereas Vibro displacement method displaces the soil. Electro osmosis makes water flow through fine grained soils. Electro kinetic stabilization is the application of electro osmosis. Reinforced soil steel is used for retaining structures, sloping walls, dams etc. seismic loading is suited for construction in seismically active regions. Mechanically stabilized earth structures create a reinforced soil mass. Vibro-compaction, sometimes referred to as Vibroflotation, is the rearrangement of soil particles into a denser configuration by the use of powerful depth vibration.Vibro Compaction is a ground improvement process for densifying loose sands to create stable foundation soils. The principle behind vibro compaction is simple. The combined action of vibration and water saturation by jetting rearranges loose sand grains into a more compact state. Vibro Compaction is performed with specially-designed vibrating probes. Both horizontal and vertical modes of vibration have been used in the past. The geo methods like Geosynthetics, Geogrid etc. are discussed. Soil nailing increases the shear strength of the insitu soil and restrains its displacement. Micro pile gives the structural support and used for repair/replacement of existing foundations. Grouting is injection of pumpable materials to increase its rigidity. The jet grouting is quite advanced in speed as well as techniques when compared with the general grouting. Rapid urban and industrial growth demands more land for further development. In order to meet this demand land reclamation and utilization of unsuitable and environmentally affected lands have been taken up. These, hitherto useless lands for construction have been converted to be useful ones by adopting one or more ground improvement techniques. The field of ground improvement techniques has been recognized as an important and rapidly expanding one. Latest Ground Improvement Techniques Following are the recent methods of ground improvement Techniques used for stabilization of soil: The vibrators used by Terra Systems consist of torpedo-shaped probes 12 to 16 inches in diameter which vibrates at frequencies typically in the range of 30 to 50 Hz. The probe is first inserted into the ground by both jetting and vibration. After the probe reaches the required depth of compaction, granular material, usually sand, is added from the ground surface to fill the void space created by the vibrator. A compacted radial zone of granular material is created • • • Advantages of Vibro Compaction Method: Reduction of foundation settlements. Reduction of risk of liquefaction due to seismic activity. Permit construction on granular fills. Vacuum Consolidation of Soil for Ground Improvement

Text from page-2

Vacuum Consolidation is an effective means for improvement of saturated soft soils. The soil site is covered with an airtight membrane and vacuum is created underneath it by using dual venture and vacuum pump. The technology can provide an equivalent pre-loading of about 4.5m high conventional surcharge fill. Vacuum-assisted consolidation preloads the soil by reducing the pore pressure while maintaining a constant total stress. • • • Applications of Vacuum Consolidation of Soil: Replace standard preloading techniques eliminating the risk of failure. Combine with a water preloading in scare fill area. The method is used to build large developments on thick compressible soil. Combine with embankment pre-load using the increased stability Preloading or Pre-Compression of Soil for Ground Improvement Preloading has been used for many years without change in the method or application to improve soil properties. Preloading or pre-compression is the process of placing additional vertical stress on a compressible soil to remove pore water over time. The pore water dissipation reduces the total volume causing settlement. Surcharging is an economical method for ground improvement. However, the consolidation of the soils is time dependent, delaying construction projects making it a non-feasible alternative. Heating or vitrification breaks the soil particle down to form a crystalline or glass product. It uses electrical current to heat the soil and modify the physical characteristics of the soil. Heating soils permanently alters the properties of the soil. Depending on the soil, temperatures can range between 300 and 1000 degree Celsius. The impact on adjacent structures and utilities should be considered when heating is used. . • • The soils treated are Organic silt, Varved silts and clays, soft clay, Dredged material The design considerations which should be made are bearing capacity, Slope stability, Degree of consolidation. • • • • • Applications of Preloading of Soil Reduce post-construction Settlement Reduce secondary compression. Densification Improve bearing capacity Thermal Stabilization of Soil for Ground Improvement • • • • • Applications of Vitrification of Soil: Immobilization of radioactive or contaminated soil Densification and stabilization Ground Freezing Technique for Ground Improvement Ground freezing is the use of refrigeration to convert in-situ pore water to ice. The ice then acts as a cement or glue, bonding together adjacent particles of soil or blocks of rock to increase their combined strength and make them impervious. The ground freezing considerations are Thermal analysis, Refrigeration system geometry, Thermal properties of soil and rock, freezing rates, Energy requirements, Coolant/ refrigerant distribution system analysis. Applications of Ground Freezing Technique Temporary underpinning Temporary support for an excavation Prevention of groundwater flow into excavated area Temporary slope stabilization Temporary containment of toxic/hazardous waste contamination Vibro-Replacement Stone Columns for Ground Improvement

Text from page-3

Vibro-Replacement extends the range of soils that can be improved by vibratory techniques to include cohesive soils. Reinforcement of the soil with compacted granular columns or “stone columns” is accomplished by the top-feed method. The important Vibro-replacement stone columns are Ground conditions, Relative density, Degree of saturation, Permeation. Principles of Vibro-Replacement Technique The stone columns and intervening soil form and integrated foundation support system having low compressibility and improved load bearing capacity. In cohesive soils, excess pore water pressure is readily dissipated by the stone columns and for this reason, reduced settlements occur at a faster rate than is normally the case with cohesive soils. • • • • • • • • • There are different types of installation methods which can be broadly classified in the following manner: Wet top feed method Dry bottom feed method Offshore bottom feed method Summary of Vibro Replacement Method Applications of Vibro-Replacement for Ground Improvement: Reduction of foundation settlement Improve bearing capacity/reduce footing size requirements Reduction of the risk of liquefaction due to seismic activity Slope stabilization Permit construction on fills Permit shallow footing construction Ground Type Relativ Sands Excellent Silty sands Excellent Silts Good Clays Marginal to good Principle • • Reinforcement Drainage Applicable soil(s) • • • • Mixed deposits of clay, silt and sandMinespoils Soft and ultra soft silts (slimes) Dumped fill Soft and ultra soft clays Garbage fills Garbage Effect(s) • • • Increased shear strength Increased stiffness Reduced liquefaction potential Common applications • • • • • • • Airport taxiways and runways Chemical plants Storage tanks & silos Pipelines Bridge abutments and approaches Offshore bridge abutments Road and railway embankments Maximum depth • 20-40 m Land / offshore application • Both Excellent (depending on grad Good Not applicable Mechanically Stabilized Earth Structures A segmental, precast facing mechanically stabilized earth wall employs metallic (strip or bar mat) or geosynthetic (geogrid or geotextile) reinforcement that is connected to a precast concrete or prefabricated metal facing panel to create a reinforced soil mass.

Text from page-4

• • • • • • • • • Principles of Mechanically Stabilized Earth Structures: The reinforcement is placed in horizontal layers between successive layers of granular soil backfill. Each layer of backfill consists of one or more compacted lifts. A free draining, non plastic backfill soil is required to ensure adequate performance of the wall system. For walls reinforced with metallic strips, load is transferred from the backfill soil to the strip reinforcement by shear along the interface. For walls with ribbed strips, bar mats, or grid reinforcement, load is similarly transferred but an additional component of strength is obtained through the passive resistance on the transverse members of the reinforcement. Facing panels are typically square, rectangular, hexagonal or cruciform in shape and are up to 4.5m ^2 in area. MSEW- Mechanically Stabilized Earth Walls, when the face batter is generally steeper than 70 degrees. RSS- Reinforced Soil Slopes, when the face batter is shallower. Applications of Mechanically Stabilized Earth Structures: RSS structures are cost effective alternatives for new construction where the cost of embankment fill, right-of-way, and other consideration may make a steeper slope desirable. Another use of reinforcement in engineered slopes is to improve compaction at the edges of a slope to decrease the tendency for surface sloughing. Design: Current practice consists of determining the geometric reinforcement to prevent internal and external failure using limit equilibrium of analysis. • Soil Nailing Technique for Ground Improvement • • • • • • The fundamental concept of soil nailing consists of reinforcing the ground by passive inclusions, closely spaced, to create insitu soil and restrain its displacements. The basic design consists of transferring the resisting tensile forces generated in the inclusions into the ground through the friction mobilized at the interfaces. • Applications of Soil Nailing Technique: Stabilization of railroad and highway cut slopes • • Excavation retaining structures in urban areas for high-rise building and underground facilities Tunnel portals in steep and unstable stratified slopes Construction and retrofitting of bridge abutments with complex boundaries involving wall support under piled foundations Micropiles for Ground Improvement Micropiles are small diameter piles (up to 300 mm), with the capability of sustaining high loads (compressive loads of over 5000 KN).The drilling equipment and methods allows micropiles to be drilled through virtually every ground conditions, natural and artificial, with minimal vibration, disturbances and noise, at any angle below horizontal. The equipment can be further adapted to operate in locations with low headroom and severely restricted access. Applications of Micropiles for Ground Improvement For Structural Support and stability Foundation for new structures Repair / Replacement of existing foundations Arresting / Prevention of movement Embankment, slope and landslide stabilization Soil strengthening and protection Example of Micro Piles for Ground Improvement: In India, in some circumstances steel pipes, coated wooden piles are used as cost-effective Options in improving the bearing capacity of foundation or restrict Displacements to tolerable levels and similar uses in stabilization of slopes, strengthening of foundations are common. Sridharan and Murthy (1993) described a Case study in which a ten-storeyed building, originally in a precarious condition due To differential settlement, was restored to safety using micropiles. Galvanized steel Pipes of 100 mm diameter and 10 m long with bottom end closed with shoe, driven at An angle of 60o with the horizontal were used and the friction between the pile and the soil was used as the design basis in evolving the remedial measures. General Grouting for Ground Improvement Grouting is the injection of pumpable materials into a soil or rock formation to change the physical characteristics of the formation. Grouting selection considerations are Site specific requirement, Soil type, Soil groutability, Porosity. Grouting can be prevented by Collapse of granular soils, Settlement under adjacent foundations, Utilities damage,

Lecture Notes