×
Hard work beats talent when talent doesn’t work hard.
--Your friends at LectureNotes
Close

Electrical Machines 1

by Md Wesh Karni
Type: NoteInstitute: Veer Surendra Sai University Of Technology VSSUT Course: B.Tech Specialization: Electrical EngineeringOffline Downloads: 146Views: 3304Uploaded: 1 year agoAdd to Favourite

Share it with your friends

Suggested Materials

Leave your Comments

Contributors

Md Wesh Karni
Md Wesh Karni
VEER SURENDRA SAI UNIVERSITY OF TECHNOLOGY LECTURE NOTES On Electrical Machine 1 Name of the Department- Electrical Engineering SUBJECT CODE-1302 NAME OF THE SUBJECT- ELECTRICAL MACHINE1 (PART 2) SEMESTER- 3RD BRANCH- EE&EEE PART2- MODULE3+ MODULE4 ELECTRICAL MACHINE 1 (BEE-1302) 1
VEER SURENDRA SAI UNIVERSITY OF TECHNOLOGY DETAIL SYLLABUS Veer Surendra Sai University of Technology, Orissa, Burla, India Department of Electrical Engineering, Syllabus of Bachelor of Technology in Electrical & Electronics Engineering, 2010 (3RD SEMESTER) ELECTRICAL MACHINES-I (3-1-0) MODULE-I (10 HOURS) Electromechanical Energy conversion, forces and torque in magnetic field systems – energy balance, energy and force in a singly excited magnetic field system, determination of magnetic force , coenergy, multi excited magnetic field systems. DC Generators – Principle of operation, Action of commutator, constructional features, armature windings, lap and wave windings, simplex and multiplex windings, use of laminated armature, E. M.F. Equation, Methods of Excitation: separately excited and self excited generators, build up of E.M.F., critical field resistance and critical speed , causes for failure to self excite and remedial measures, Armature reaction: Cross magnetizing and demagnetizing AT/pole, compensating winding, commutation, reactance voltage, methods of improving commutation Load characteristics of shunt, series and compound generators, parallel operation of DC generators, use of equalizer bar and cross connection of field windings, load sharing. MODULE-II (10 HOURS) Transformers: Single phase transformer, Constructional details, Core, windings, Insulation, principle of operation, emf equation, magnetising current and core losses, no load and on load operation, Phasor diagram, equivalent circuit, losses and efficiency, condition for maximum efficiency, voltage regulation, approximate expression for voltage regulation, open circuit and short circuit tests, Sumpner’s test, Inrush of switching currents, harmonics in single phase transformers, magnetizing current wave form, Parallel operation of transformers. MODULE-III (10 HOURS) DC Motors: Principle of operation, Back E.M.F., Torque equation, characteristics and application of shunt, series and compound motors, Armature reaction and commutation, Starting of DC motor, Principle of operation of 3 point and 4 point starters, drum controller, Constant & Variable losses, calculation of efficiency, condition for maximum efficiency. ELECTRICAL MACHINE 1 (BEE-1302) 2
VEER SURENDRA SAI UNIVERSITY OF TECHNOLOGY Speed control of DC Motors: Armature voltage and field flux control methods, Ward Leonard method. Methods of Testing: direct, indirect and regenerative testing, brake test, Swinburne’s test, Load test, Hopkinson’s test, Field’s test, Retardation test, separation of stray losses in a DC motor test. MODULE-IV (10 HOURS) Three phase Transformer: Constructional features of three phase transformers – three phase connection of transformers (Dd0, Dd6, Yy0, Yy6, Dy1, Dy11, Yd1, Yd11, zigzag), Scott connection, open delta connection, three phase to six phase connection, oscillating neutral, tertiary winding, three winding transformer, equal and unequal turns ratio, parallel operation, load sharing.Distribution transformers, all day efficiency, Autotransformers, saving of copper, applications, tap- changing transformers, cooling of transformers. ELECTRICAL MACHINE 1 (BEE-1302) 3
VEER SURENDRA SAI UNIVERSITY OF TECHNOLOGY Disclaimer This document does not claim any originality and cannot be used as a substitute for prescribed textbooks. The information presented here is merely a collection by the committee members for their respective teaching assignments. Various sources as mentioned at the end of the document as well as freely available material from internet were consulted for preparing this document. The ownership of the information lies with the respective authors or institutions. Further, this document is not intended to be used for commercial purpose and the committee members are not accountable for any issues, legal, or otherwise, arising out of this document. The committee members make no representations or warranties with respect to the accuracy or completeness of the contents of this document and specially disclaim any implied warranties of merchantability or fitness for a particular purpose. The committee members shall not be liable for any loss or profit or any other commercial damages, including but not limited to special, incidental, consequential, or other damages. ELECTRICAL MACHINE 1 (BEE-1302) 4

Lecture Notes