Note for Digital Signal Processing - DSP By Lokesh Lodha
- Digital Signal Processing - DSP
- Note
- 36 Views
- Uploaded 1 year ago
Text from page-1
Jaipur National University, Jaipur School of Engineering & Technology Department of Electronics & Communication Sub: DSP&A Assignment-1 Q1. A Continuous time periodic signal with fourier series cofficients Ck = (Β½) |k| a period Tp = 0.1 sec. passes through an ideal ideal low pass filter with cutoff frequency Fc = 102.5 Hz. The resulting signal ya (t) is sampled periodically with T = 0.005 sec. Determine the spectrum of the sequence y(n) = ya (nT). Q2. Consider the sampling of the bandpass signal whose spectrum is illustrated in figure given below. Also determine the minimum sampling rate Fs to avoid aliasing. Q3. A bandlimited continuous-time signal xa (t) is sampled at a sampling frequency Fs β₯ 2B. Determine the energy Ed of the resulting discrete-time signal x(n) as a function of the energy of the analog signal, Ea , and the sampling period T = 1/Fs. Q4. Given the eight-point DFT of the sequence 1, 0 β€ π β€ 3 x (n) = { } 0, 4 β€ π β€ 7 compute the DFT of the sequences1, π=0 (a) X1 = { 0, 1 β€ π β€ 4 } 1, 5 β€ π β€ 7 0, (b) X1 = {1, 0, 0β€πβ€1 2 β€ π β€ 5} 6β€πβ€7 Q5. Compute the 8-point DFT of the sequence 1, 0 β€ π β€ 7 x (n) = { } 0, ππ‘βπππ€ππ π by using the decimation-in-frequency FFT algorithm described in the text. Q6. Computed the 16-point DFT of the sequence X(n) = cos (Ο/2) n , 0β€ n β€ 15
Text from page-2
Using the radix-4 decimation-in-time algorithm. Q7. Determine the order of the analog Butterworth filter that has a (-2) db pass band attenuation at a frequency of 20 rad/sec and atleast (-10) db stop band attenuation at 30 rad/sec. Q8. Consider a Chebychev filter with attenuation not more than 1.0 dB for | w |ο£ο 1000 rads / s and at least 10 dB for | w |ο³ο 5000 rads / s. Q9. Let us design a Butterworth LP filter with specifications: Passband amplitude to be within 2.0 dB for frequencies below 0.2Ο rad / s and the stopband magnitude to be less than 10 dB for 0. 4Ο rad / s ο or above. Assume unity gain at D.C. Q10. A non-recursive filter is characterized by the transfer function H(z) =1 + 2z + 3z2+ 4 z3 + 3 z4+ 2 z5+ z6 z6 Find the group delay. ******************
Leave your Comments