×
Don't wait for the right time for studying... It won't come.
--Your friends at LectureNotes
Close

Environmental Engineering

by Jntu Heroes
Type: NoteInstitute: Jawaharlal nehru technological university anantapur college of engineering Specialization: Computer Science EngineeringOffline Downloads: 657Views: 15609Uploaded: 10 months agoAdd to Favourite

Share it with your friends

Suggested Materials

Leave your Comments

Contributors

Jntu Heroes
Jntu Heroes
LECTURE NOTE ENVIRONMENTAL ENGINEERING 1 UNDER REVISION
3 UNDER REVISION
LECTURE-1 Module-1 Raw Water Source The various sources of water can be classified into two categories: 1. Surface sources, such as a. Ponds and lakes; b. Streams and rivers; c. Storage reservoirs; and d. Oceans, generally not used for water supplies, at present. 2. Sub-surface sources or underground sources, such as a. Springs; b. Infiltration wells ; and c. Wells and Tube-wells. Water Quantity Estimation The quantity of water required for municipal uses for which the water supply scheme has to be designed requires following data: 1. Water consumption rate (Per Capita Demand in litres per day per head) 2. Population to be served. Quantity= Per capita demand x Population Water Consumption Rate It is very difficult to precisely assess the quantity of water demanded by the public, since there are many variable factors affecting water consumption. The various types of water demands, which a city may have, may be broken into following classes: Water Consumption for Various Purposes: Types of Consumption Normal Range Average % (lit/capita/day) 1 Domestic Consumption 65-300 160 35 2 Industrial Demand 45-450 135 30 20-90 45 10 45-150 62 25 and 3 Public Uses Demand Commercial including Fire 4 Losses and Waste Fire Fighting Demand: The per capita fire demand is very less on an average basis but the rate at which the water is required is very large. The rate of fire demand is sometimes traeted as a function of population and is worked out from following empirical formulae: Authority Formulae (P in thousand) Q for 1 lakh Population) 1 American Insurance Association 2 Kuchling's Formula Q (L/min)=4637 √P (1-0.01√P) 41760 Q (L/min)=3182 √P 31800 4 UNDER REVISION
3 Freeman's Formula Q (L/min)= 1136.5(P/5+10) Ministry of Urban Q (kilo liters/d)=100 √P for P>50000 4 Development Manual Formula 35050 31623 Factors affecting per capita demand: a. Size of the city: Per capita demand for big cities is generally large as compared to that for smaller towns as big cities have sewered houses. b. Presence of industries. c. Climatic conditions. d. Habits of people and their economic status. e. Quality of water: If water is aesthetically & medically safe, the consumption will increase as people will not resort to private wells, etc. f. Pressure in the distribution system. g. Efficiency of water works administration: Leaks in water mains and services; and unauthorised use of water can be kept to a minimum by surveys. h. Cost of water. i. Policy of metering and charging method: Water tax is charged in two different ways: on the basis of meter reading and on the basis of certain fixed monthly rate. Fluctuations in Rate of Demand Average Daily Per Capita Demand = Quantity Required in 12 Months/ (365 x Population) If this average demand is supplied at all the times, it will not be sufficient to meet the fluctuations.    Seasonal variation: The demand peaks during summer. Firebreak outs are generally more in summer, increasing demand. So, there is seasonal variation . Daily variation depends on the activity. People draw out more water on Sundays and Festival days, thus increasing demand on these days. Hourly variations are very important as they have a wide range. During active household working hours i.e. from six to ten in the morning and four to eight in the evening, the bulk of the daily requirement is taken. During other hours the requirement is negligible. Moreover, if a fire breaks out, a huge quantity of water is required to be supplied during short duration, necessitating the need for a maximum rate of hourly supply. So, an adequate quantity of water must be available to meet the peak demand. To meet all the fluctuations, the supply pipes, service reservoirs and distribution pipes must be properly proportioned. The water is supplied by pumping directly and the pumps and distribution system must be designed to meet the peak demand. The effect of monthly variation influences the design of storage reservoirs and the hourly variations influences the design of pumps and service reservoirs. As the population decreases, the fluctuation rate increases. Maximum daily demand = 1.8 x average daily demand 5 UNDER REVISION

Lecture Notes