×

Close

- Structural Analysis-1 - SA-1
- Note
**Dr. A.P.J. Abdul Kalam Technical University - AKTU**- Civil Engineering
- B.Tech
- 2 Topics
**4116 Views**- 176 Offline Downloads
- Uploaded 1 year ago

Touch here to read

Page-1

Topic:

CE2302 STRUCTURAL ANALYSIS – CLASSICAL METHODS Comment [R1]: 3 1 0 4 Comment [R2]: OBJECTIVE The members of a structure are subjected to internal forces like axial forces, shearing forces, bending and torsional moments while transferring the loads acting on it. Structural analysis deals with analysing these internal forces in the members of the structures. At the end of this course students will be conversant with classical method of analysis. UNIT I DEFLECTION OF DETERMINATE STRUCTURES 9 Principles of virtual work for deflections – Deflections of pin-jointed plane frames and rigid plane frames – Willot diagram - Mohr’s correction UNIT II MOVING LOADS AND INFLUENCE LINES (DETERMINATE & INDETERMINATE STRUCTURES) 9 Influence lines for reactions in statically determinate structures – influence lines for members forces in pin-jointed frames – Influence lines for shear force and bending moment in beam sections – Calculation of critical stress resultants due to concentrated and distributed moving loads. Muller Breslau’s principle – Influence lines for continuous beams and single storey rigid frames – Indirect model analysis for influence lines of indeterminate structures – Beggs deformeter UNIT III ARCHES 9 Arches as structural forms – Examples of arch structures – Types of arches – Analysis of three hinged, two hinged and fixed arches, parabolic and circular arches – Settlement and temperature effects. UNIT IV SLOPE DEFLECTION METHOD 9 Continuous beams and rigid frames (with and without sway) – Symmetry and antisymmetry – Simplification for hinged end – Support displacements. UNIT V MOMENT DISTRIBUTION METHOD 9 Distribution and carry over of moments – Stiffness and carry over factors – Analysis of continuous beams – Plane rigid frames with and without sway – Naylor’s simplification. TUTORIAL 15 TOTAL : 60 TEXT BOOKS 1. “Comprehensive Structural Analysis – Vol. 1 & Vol. 2”, Vaidyanadhan, R and Perumal, P, Laxmi Publications, New Delhi, 2003 2. “Structural Analysis”, L.S. Negi & R.S. Jangid, Tata McGraw-Hill Publications, New Delhi, Sixth Edition, 2003 3. Punmia B.C., Theory of Structures (SMTS ) Vol II laxmi Publishing Pvt ltd, New Delhi, 2004 REFERENCES 1. Analysis of Indeterminate Structures – C.K. Wang, Tata McGraw-Hill, 1992

STRUCTURAL ANALYSIS NOTES OF LESSON I UNIT – DEFLECTION OF DETERMINATE STRUCTURES Theorem of minimum Potential Energy Potential energy is the capacity to do work due to the position of body. A body of weight ‗W‘ held at a height ‗h‘ possess energy ‗Wh‘. Theorem of minimum potential energy states that ― Of all the displacements which satisfy the boundary conditions of a structural system, those corresponding to stable equilibrium configuration make the total potential energy a relative minimum‖. This theorem can be used to determine the critical forces causing instability of the structure. Law of Conservation of Energy From physics this law is stated as ―Energy is neither created nor destroyed‖. For the purpose of structural analysis, the law can be stated as ― If a structure and external loads acting on it are isolated, such that it neither receive nor give out energy, then the total energy of the system remain constant‖. With reference to figure 2, internal energy is expressed as in equation (9). External work done We = -0.5 P dL. From law of conservation of energy U i+We =0. From this it is clear that internal energy is equal to external work done. Principle of Virtual Work: Virtual work is the imaginary work done by the true forces moving through imaginary displacements or vice versa. Real work is due to true forces moving through true displacements. According to principle of virtual work ― The total virtual work done by a system of forces during a virtual displacement is zero‖. Theorem of principle of virtual work can be stated as “If a body is in equilibrium under a Virtual force system and remains in equilibrium while it is subjected to a small deformation, the virtual work done by the external forces is equal to the virtual work done by the internal stresses due to these forces”. Use of this theorem for computation of displacement is explained by considering a simply supported bea AB, of span L, subjected to concentrated load P at C, as shown in Fig.6a. To compute deflection at D, a virtual load P‘ is applied at D after removing P at C. Work done is zero a s the load is virtual. The load P is then applied at C, causing deflection C at C and D at D, as shown in Fig. 6b. External work done We by virtual load P‘ is . If the virtual load P‘ produces bending moment M‘, then the internal strain energy stored by M‘ acting on the real deformation d in element dx over the beam equation (14) P' δ D We 2 L M'M dx M'dθ ; Ui dU i 2 2 EI 0 0 0 U L

Where, M= bending moment due to real load P. From principle of conservation of energy We=Wi P' δD L M'M dx 2 2 EI 0 P C A D a B Fig.6a x P P’ D C C A L D B a Fig.6b x L If P‘=1 then M'M dx EI 0 L δD (16) Similarly for deflection in axial loaded trusses it can be shown that n δ 0 P' P dx (17) AE Where, = Deflection in the direction of unit load P‘ = Force in the ith member of truss due to unit load P = Force in the ith member of truss due to real external load n = Number of truss members L = length of ith truss members. Use of virtual load P‘ Unit Load Method Castiglione’s Theorems: = 1 in virtual work theorem for computing displacement is called

Castigliano published two theorems in 1879 to determine deflections in structures and redundant in statically indeterminate structures. These theorems are stated as: 1st Theorem: “If a linearly elastic structure is subjected to a set of loads, the partial derivatives of total strain energy with respect to the deflection at any point is equal to the load applied at that point” U Pj j 1,2, ..... N (18) δ j 2nd Theorem: “If a linearly elastic structure is subjected to a set of loads, the partial derivatives of total strain energy with respect to a load applied at any point is equal to the deflection at that point” U δ j j 1,2,....... N (19) Pj The first theorem is useful in determining the forces at certain chosen coordinates. The conditions of equilibrium of these chosen forces may then be used for the analysis of statically determinate or indeterminate structures. Second theorem is useful in computing the displacements in statically determinate or indeterminate structures. Betti’s Law: It states that If a structure is acted upon by two force systems I and II, in equilibrium separately, the external virtual work done by a system of forces II during the deformations caused by another system of forces I is equal to external work done by I system during the deformations caused by the II system I II Fig. 7 A body subjected to two system of forces is shown in Fig 7. W ij represents work done by ith system of force on displacements caused by jth system at the same point. Betti‘s law can be expressed as Wij = Wji, where Wji represents the work done by jth system on displacement caused by ith system at the same point.

## Leave your Comments