--Your friends at LectureNotes

Note for Design of Advanced Concrete Structures - DACS By Amity Kumar

  • Design of Advanced Concrete Structures - DACS
  • Note
  • Amity school of engineering and technology, bijwasan - Aset
  • Civil Engineering
  • 19 Topics
  • 110 Offline Downloads
  • Uploaded 1 year ago
0 User(s)
Download PDFOrder Printed Copy

Share it with your friends

Leave your Comments

Text from page-1

Lecture-1 Advanced Concrete Technology Unit – 1 Cement- The hidden material • Hidden around us all the time but we hardly notice it • Super-material, strange structure, many uses namely, • structural • functional What is cement? • Cement, any material that hardens and becomes strongly adhesive after application. • Manufactured substance consisting of gypsum plaster, or Portland cement • Portland cement hardens and adheres after being mixed with water History of Cement: • The term “Portland cement” was first used in 1824 by Joseph Aspdin, a British cement-maker, because of the resemblance between concrete made from his cement and Portland stone, which was commonly used in building in Britain. • The first modern Portland cement, made from lime and clay materials heated until they formed clinkers was produced by Isaac Charles Johnson in Britain in 1845. • At that time cements were usually made in upright kilns where the raw materials were spread between layers of coke, which was then burnt. • The first rotary kilns were introduced about 1880. Portland cement is now almost universally used for structural concrete. How is it made? • Limestone for calcium and Clay or shale for Silica/Alumina is used as raw materials. • The manufacturing process of Portland cement clinker consist essentially of grinding the raw materials, mixing them in appropriate proportion, burning the raw material in a kiln at a temperature of 1400-1500 oC until material partially fuses into balls known as clinker and grinding to cooled clinker together with a small amount of gypsum rock. • The mixture of raw material is burned in a rotary kiln.

Text from page-2

Lecture-1 The Kiln: • • The heart of the cement plant o Largest moving part of any machine o inclined, rotates o up to 50m long and 5m diam. Heated by fire jet The rotary kiln is along steel cylinder lined with refractory brick (length /diameter ~30).Modern kilns may reach 6m in diameter and over 180m in height with a production capacity exceeding 1000 tones a day. • The kiln is inclined a few degrees from the horizontal ( about 4 cm\m ) and is rotated about its axis at a speed of about 60 to 150 revolution \ hour ). • Pulverized coal or gas is used as the source of heat. The heat is supplied from the lower end of the kiln. The max. Temperature near the lower end of the kiln is generally about 1400-1500 OC. • The upper end of the kiln the temperature is around 150 OC. • The mixture of the raw material is fed from the upper end of the kiln.This material move toward the lower end by effect of inclanation and rotation of the kiln. Thus the material is subjected to high temperature at lower end of the kiln. • The materials that are introduced into the rotary kiln are subjected to several distinct process as they move downward. • When the raw materials are fed into the kiln, drying of the material takes place, and any free water in the raw material is evaporated. • Clay losses its water about 150 to 350 OC. • Clay decompose at a range of 350 to 650 OC. • Magnesite in raw material loss about 600 OC.

Text from page-3

Lecture-1 • The limestone losses its CO2 at about 900 OC. • At 1250 to 1280 OC some liquid formation begins and compound formation start to takes place. • Clinkering begins at about 1280 OC. The liquid that forms during the burning process causes the charge to agglomerate into nodules of various size, usually 1-25 mm in diameter known as Portland cement clinker. • All exhaust gases produced during the burning process of the materials leave the kiln through the stack. Cooling & grinding • Rapid cool - glassy • Grinding starts golf ball size. Ends about 2-80 microns, 300 m2/kg. Grinding depends on application. Typical plant capacity is about: 1 MT/y • Portland cement is manufactured by inter grinding the Portland cement clinker with some (3 to 6 %) gypsum rock. Cement: Physical, Chemical Properties and Hydration Physical Properties Portland cements are commonly characterized by their physical properties for quality control purposes. Their physical properties can be used to classify and compare Portland cements. The challenge in physical property characterization is to develop physical tests that can satisfactorily characterize key parameters. The physical properties of cement • Fineness • Soundness • Setting Time • Strength Fineness

Text from page-4

Lecture-1 • Fineness or particle size of Portland cement affects Hydration rate and thus the rate of strength gain. The smaller the particle size, the greater the surface areato-volume ratio, and thus, the more area available for water-cement interaction per unit volume. The effects of greater fineness on strength are generally seen during the first seven days. • When the cement particles are coarser, hydration starts on the surface of the particles. So the coarser particles may not be completely hydrated. This causes low strength and low durability. • For a rapid development of strength a high fineness is necessary. Soundness When referring to Portland cement, "soundness" refers to the ability of a hardened cement paste to retain its volume after setting without delayed

Lecture Notes