Aiming for the stars? Great, but did you have to build a rocket first.
--Your friends at LectureNotes

Note for Microprocessor and Microcontroller - MPMC By Rashmi Ranjan Pani

  • Microprocessor and Microcontroller - MPMC
  • Note
  • Gandhi Institute For Technology, GIFT - GIFT
  • Electrical and Electronics Engineering
  • 6 Topics
  • 165 Offline Downloads
  • Uploaded 1 year ago
0 User(s)
Download PDFOrder Printed Copy

Share it with your friends

Leave your Comments

Text from page-1

MICROPROCESSOR & MICRO CONTROLLERS MODULE-1 Microprocessor and Microcomputer Architecture MICROPROCESSOR BASED SYSTEM: ➢ The microprocessor is a multipurpose, programmable, register based, clock driven semiconductor device (Integrated Circuit) manufactured by the VLSI (Very Large Scale Integration) technique. It includes the ALU, register arrays and control circuit on a single chip. ➢ To perform a function or useful task we have to form a system by using microprocessor as a CPU and interfacing memory, input and output devices to it. A system designed using a microprocessor as its CPU is called a microcomputer. ➢ The Microprocessor based system (single board microcomputer) consists of: • microprocessor as CPU • semiconductor memories like EPROM and RAM • input device, output device and interfacing devices. ➢ The memories, input device, output device and interfacing devices are called peripherals. The popular input devices are keyboard and floppy disk and the output devices are printer,LED/LCD displays, CRT monitor, etc.

Text from page-2

The above block diagram shows the organization of a microprocessor based system. In this system, the microprocessor is the master and all other peripherals are slaves. The master controls all the peripherals and initiates all operations. ➢ The work done by the processor can be classified into the following three groups. 1. Work done internal to the processor 2. Work done external to the processor 3. Operations initiated by the slaves or peripherals. The work done internal to the processors are addition, subtraction, logical operations, data transfer operations, etc. The work done external to the processor are reading/writing the memory and reading/writing the J/O devices or the peripherals. If the peripheral requires the attention of the master then it can interrupt the master and initiate an operation. The microprocessor is the master, which controls all the activities of the system. ➢ To perform a specific job or task, the microprocessor has to execute a program stored in memory. The program consists of a set of instructions. It issues address and control signals and fetches the instruction and data from memory. The instruction is executed one by one internal to the processor and based on the result it takes appropriate action. BUSES: The buses are group of lines that carries data, address or control signals. The CPU Bus has multiplexed lines, i.e., same line is used to carry different signals. The CPU interface is provided to demultiplex the multiplexed lines, to generate chip select signals and additional control signals. The system bus has separate lines for each signal. All the slaves in the system are connected to the same system bus. At any time instant communication takes place between the master and one of the slaves. All the slaves have tristate logic and hence normally remain in high impedance state. Only when the slave is selected it comes to the normal logic. PERIPHERAL DEVICES: • The EPROM memory is used to store permanent programs and data. • The RAM memory is used to store temporary programs and data. • The input device is used to enter the program, data and to operate the system. • The output device is used for examining the results. Since the speed of I/O devices does not match with the speed of microprocessor, an interface device is provided between system bus and I/O devices. Generally I/O devices are slow devices.

Text from page-3

APPLICATIONS: Microprocessor is a multi-use device which finds applications in almost all the fields. Examples :Electronics: Digital clocks & Watches ,Mobile phones ,Measuring Meters Mechanical: Automobiles,Lathes,All remote machines Electrical: Motors ,Lighting controls ,Power stations Medical: Patient monitoring ,Most of the Medical equipments ,Data loggers Computer: All computer accessories ,Laptops & Modems ,Scanners & Printers Domestic: Microwave Ovens ,Television/CD/DVD players ,Washing Machines Advantages of Microprocessor based system 1. Computational/processing speed is high. 2. Intelligence has been brought to systems. 3. Automation of industrial processes and office administration. 4. Since the devices are programmable, there is flexibility to alter the system by changing the software alone. 5. Less number of components, compact in size and cost less. Also it is more reliable. 6. Operation and maintenance are easier. Disadvantages of Microprocessor based System 1. It has limitations on the size of data. 2. The applications are limited by the physical address space. 3. The analog signals cannot be processed directly and digitizing the analog signals introduces errors. 4. The speed of execution is slow and so real time applications are not possible. 5. Most of the microprocessors does not support floating point operations.

Text from page-4

INTEL 8085 – Pin Diagram & Description • The INTEL 8085 is a 8-bit microprocessor. • It operates on 8-bit data and uses 16-bit address to access the memory. • With the help of 16-bit address, 8085 can access 216 = 65536 = 64K memory locations. • It is a 40-pin DIP chip designed using NMOS. • It operates with a power supply of +5 volts and GND. • 8085 generates the clock signal internally by dividing the external supplied clock signal by 2. ➢ The signals from the pins can be grouped as follows: 1. Power supply and clock signals 2. Address bus 3. Data bus 4. Control and status signals 5. Interrupts and externally initiated signals 6. Serial I/O ports

Lecture Notes