×
Don’t stop when you’re tired. STOP when you are DONE.

# Note for Basic Electrical Engineering - BEE by Saad Ather

• Basic Electrical Engineering - BEE
• Note
• 5 Topics
• 46 Views
Page-1

#### Note for Basic Electrical Engineering - BEE by Saad Ather

Topic: / 65

0 User(s)

#### Text from page-1

Smartzworld.com Smartworld.asia LECTURE NOTES ON BASIC ELECTRICAL ENGINEERING II B. Tech I semester COMPUTER SCIENCE AND ENGINEERING jntuworldupdates.org Specworld.in

#### Text from page-2

Smartzworld.com Smartworld.asia UNIT-I Introduction to Electrical Engineering jntuworldupdates.org Specworld.in

#### Text from page-3

Smartzworld.com Smartworld.asia Ohms Law: At constant temperature potential difference across the conductor is directly proportional to current flowing through the conductor is called ohms law. V ∝I V=IR where the constant of proportionality R is called the resistance or electrical resistance, measured in ohms (Ω). Graphically, the V − I relationship for a resistor according to Ohm‟s law is depicted in Figure Figure V − I relationship for a resistor according to Ohm‟s law. At any given point in the above graph, the ratio of voltage to current is always constant basic circuit components: jntuworldupdates.org Specworld.in

#### Text from page-4

Smartzworld.com Smartworld.asia Circuit Element Voltage Current Resistor V = IR I= Inductor v=L di ¸ 0 R i= 1 L dt v= 1 Capacitor V t idt + v(0) C i=C ¸ t vdt 0 dv , i = 0 for DC dt V − I relationships for a resistor, inductor and capacitor. Kirchhoff’s Voltage Law (KVL) Kirchhoff‟s Voltage Law states that the algebraic sum of voltages around each loop at any instant of time is zero Σ voltage drops = Σ voltage rises Kirchhoff’s Current Law (KCL) Kirchhoff‟s Current Law states that The algebraic sum of currents a node at any instant is zero. Σ currents in = Σ currents out Basic Definitions: Current: the directed flow of electrons (charge) called current. It is denoted by I. units are Amps Electrical potential: charged body capacity to do work is known as its electrical potential. Potential difference: difference in potentials of two charged bodies is called Potential difference Power: the rate at which an electrical work done in electrical work is called power. It is denoted by P. units are Watt Electrical work: Electrical work is said to be done when there is transfer of charge. It is denoted by W. units are joules. Energy: capacity to do work is called energy. Electrical Network: A combination of various electric elements (Resistor, Inductor, Capacitor, Voltage source, Current source) connected in any manner what so ever is called an electrical network Classification of element: We may classify circuit elements in two categories, passive and active elements. Passive Element: The element which receives energy (or absorbs energy) and then either converts it into heat (R) or stored it in an electric (C) or magnetic (L) field is called passive element. jntuworldupdates.org Specworld.in