×
Stop thinking about WHAT WILL HAPPEN and start thinking about WHAT YOU CAN DO.
--Your friends at LectureNotes
Close

DESIGN OF REINFORCED CONCRETE STRUCTURES

by Anna Superkings
Type: NoteInstitute: ANNA UNIVERISTY Specialization: Civil EngineeringOffline Downloads: 14Views: 836Uploaded: 3 months agoAdd to Favourite

Touch here to read
Page-1

DESIGN OF REINFORCED CONCRETE STRUCTURES by Anna Superkings

Topic:
Anna Superkings
Anna Superkings

/ 127

Share it with your friends

Suggested Materials

Leave your Comments

Contributors

Anna Superkings
Anna Superkings
Fatima Michael College of Engineering & Technology COURSE MATERIAL CE 6505-DESIGN OF RC ELEMENTS CIVIL ENGINEERING SEM- V YEAR 2015-16 Fatima Michael College of Engineering & Technology
Fatima Michael College of Engineering & Technology UNIT 1 INTRODUCTION Reinforced concrete, as a composite material, has occupied a special place in the modern construction of different types of structures due to its several advantages. Italian architect Ponti once remarked that concrete liberated us from the rectangle. Due to its flexibility in form and superiority in performance, it has replaced, to a large extent, the earlier materials like stone, timber and steel. Further, architect's scope and imaginations have widened to a great extent due to its mouldability and monolithicity. Thus, it has helped the architects and engineers to build several attractive shell forms and other curved structures. However, its role in several straight line structural forms like multistoried frames, bridges, foundations etc. is enormous. The design of these modern reinforced concrete structures may appear to be highly complex. However, most of these structures are the assembly of several basic structural elements such as beams, columns, slabs, walls and foundations Accordingly, the designer has to learn the design of these basic reinforced concrete elements. The joints and connections are then carefully developed. Design of reinforced concrete structures started in the beginning of last century following purely empirical approach. Thereafter came the so called rigorous elastic theory where the levels of stresses in concrete and steel are limited so that stress-deformations are taken to be linear. However, the limit state method, though semi-empirical approach, has been found to be the best for the design of reinforced concrete structures (see sec. 1.1.3.1 also). Objectives of the Design of Reinforced Concrete Structures Every structure has got its form, function and aesthetics. Normally, we consider that the architects will take care of them and the structural engineers will be solely responsible for the strength and safety of the structure. However, the roles of architects and structural engineers are very much interactive and a unified approach of both will only result in an "Integrated" structure, where every material of the total structure takes part effectively for form, function, aesthetics, strength as well as safety and durability. This is possible when architects have some basic understanding of structural design and the structural engineers also have the basic knowledge of architectural requirements. Both the engineer and the architect should realize that the skeletal structure without architecture is barren and mere architecture without the structural strength and safety is disastrous. Safety, here, includes consideration of reserve strength, limited deformation and durability. However, some basic knowledge of architectural and structural requirements would facilitate to appreciate the possibilities and limitations of exploiting the reinforced concrete material for the design of innovative structures. Before proceeding to the design, one should know the objectives of the design of concrete structures. The objectives of the design are as follows: Fatima Michael College of Engineering & Technology
Fatima Michael College of Engineering & Technology 1 .The structures so designed should have an acceptable probability of performing satisfactorily during their intended life. This objective does not include a guarantee that every structure must perform satisfactorily during its intended life. There are uncertainties in the design process both in the estimation of the loads likely to be applied on the structure and in the strength of the material. Moreover, full guarantee would only involve more cost. Thus, there is an acceptable probability of performance of structures as given in standard codes of practices of different countries. 2. The designed structure should sustain all loads and deform within limits for construction and use. Adequate strengths and limited deformations are the two requirements of the designed structure. The structure should have sufficient strength and the deformations must be within prescribed limits due to all loads during construction. The structure having insufficient strength of concrete which fails in bending compression with the increase of load, though the deformation of the structure is not alarming. On the other hand another situation where the structure, having sufficient strength, deforms excessively. Both are undesirable during normal $construction and use. However, sometimes structures are heavily loaded beyond control. The structural engineer is not responsible to ensure the strength and deformation within limit under such situation. The staircases in residential buildings during festival like marriage etc., roof of the structures during flood in the adjoining area or for buildings near some stadium during cricket or football matches are some of the examples when structures get overloaded. Though, the structural designer is not responsible for the strength and deformations under these situations, he, however, has to ensure that the failure of the structures should give sufficient time for the occupants to vacate. The structures, thus, should give sufficient warning to the occupants and must not fail suddenly. 3. The designed structures should be durable. The materials of reinforced concrete structures get affected by the environmental conditions. Thus, structures having sufficient strength and permissible deformations may have lower strength and exhibit excessive deformations in the long run. The designed structures, therefore, must be checked for durability. Separate checks for durability are needed for the steel reinforcement and concrete. This will avoid problems of frequent repairing of the structure. 4. The designed structures should adequately resist to the effects of misuse and fire. Structures may be misused to prepare fire works, store fire works, gas and other highly inflammable and/or explosive chemicals. Fire may also take place as accidents or as secondary effects during earthquake by overturning kerosene stoves or lantern, electrical short circuiting etc. Properly designed structures Fatima Michael College of Engineering & Technology
Fatima Michael College of Engineering & Technology should allow sufficient time and safe route for the persons inside to vacate the structures before they actually collapse. How to fulfill the objectives? All the above objectives can be fulfilled by understanding the strength and deformation characteristics of the materials used in the design as also their deterioration under hostile exposure. Out of the two basic materials concrete and steel, the steel is produced in industries. Further, it is available in form of standard bars and rods of specific diameters. However, sample testing and checking are important to ensure the quality of these steel bars or rods. The concrete, on the other hand, is prepared from several materials (cement, sand, coarse aggregate, water and admixtures, if any). Therefore, it is important to know the characteristic properties of each of the materials used to prepare concrete. These materials and the concrete after its preparation are also to be tested and checked to ensure the quality. The necessary information regarding the properties and characteristic strength of these materials are available in the standard codes of practices of different countries. It is necessary to follow these clearly defined standards for materials, production, workmanship and maintenance, and the performance of structures in service. Method of Design Three methods of design are accepted in cl. 18.2 of IS 456:2000 (Indian Standard Plain and Reinforced Concrete - Code of Practice, published by the Bureau of Indian Standards, New Delhi). They are as follows: Limit state method The term “Limit states” is of continental origin where there are three limit states serviceability / crack opening / collapse. For reasons not very clear, in English literature limit state of collapse is termed as limit state. As mentioned in sec. 1.1.1, the semi-empirical limit state method of design has been found to be the best for the design of reinforced concrete members. More details of this method are explained in Module 3 (Lesson 4). However, because of its superiority to other two methods (see sections 2.3.2 and 2.3.3 of Lesson 3), IS 456:2000 has been thoroughly updated in its fourth revision in 2000 takinginto consideration the rapid development in the field of concrete technology and incorporating important aspects like durability etc. This standard has put greater emphasis to limit state method of design by presenting it in a full section (section 5), while the working stress method has been given in Annex B of the same standard. Accordingly, structures or structural elements shall normally be designed by limit state method. Working stress method Fatima Michael College of Engineering & Technology

Lecture Notes