×
I find that the harder I work, the more luck I seem to have.
--Your friends at LectureNotes
Close

Note for Basic Electronics - BE By JAYAPRASAD KM

  • Basic Electronics - BE
  • Note
  • N.M.A.M. Institute of Technology - NMAMIT
  • Electronics and Communication Engineering
  • 2503 Views
  • 24 Offline Downloads
  • Uploaded 1 year ago
0 User(s)
Download PDFOrder Printed Copy

Share it with your friends

Leave your Comments

Text from page-1

BASIC ELECTRONICS MODULE 1 NOTES 18ELN14/24 CONTENTS 1 SEMICONDUCTOR DIODES AND APPLICATIONS 1.1 P-N JUNCTION 1.1.1 Biased junction 1.1.2 Reverse-biased junction 1.1.3 Forward-biased junction 1.1.4 1.1.5 1.1.6 1.1.7 1.2 1.2.1 1.2.2 1.3 Diode Relationship Zener Region Zener Breakdown EQUIVALENT CIRCUIT OF DIODE Ideal diode and practical diode Piecewise Linear Characteristics ZENER DIODE 1.3.1 1.4 Zener Diode as a Voltage Regulator RECTIFIERS 1.4.1 1.5 1.5.1 1.5.2 1.6 Half Wave Rectifer Full-Wave Rectifier Full Wave Bridge Rectifier FILTERING Choke-Capacitor Filter Peak Rectifier PHOTODIODES 1.6.1 1.6.2 1.6.3 1.6.4 1.7 P-N junction diode Light Definition And Units Photo Diodes Light Emitting Diode (LED) Photocoupler 78XX SERIES VOLTAGE REGULATOR 1.7.1 Fixed Regulator 1.8 QUESTIONS Prepared by: Prof. Jayaprasad K M, Prof. Vinay H S, Prof. Dayanand G K. 3 3 4 4 4 5 6 8 8 8 8 8 10 10 13 13 18 22 30 30 31 31 31 32 33 33 34 35 36 Page 1

Text from page-2

BASIC ELECTRONICS MODULE 1 NOTES 18ELN14/24 SYLLABUS Semiconductor Diodes and Applications (Text-1): p-n junction diode, Equivalent circuit of diode, Zener diode, Zener diode as a voltage regulator, Rectification-half wave rectifier, Full wave rectifier, Bridge rectifier, Capacitor filter, photo diode, LED, photo Coupler, 78XX series and 7805 Fixed IC voltage Regulator TEXT BOOK: BOOK TITLE/AUTHORS/PUBLICATION TEXT-1 D.P. Kothari, I. J. Nagrath, “Basic Electronics”, 2nd Ed., McGraw Hill Education (India) Private Limited, 2018. Prepared by: Prof. Jayaprasad K M, Prof. Vinay H S, Prof. Dayanand G K. Page 2

Text from page-3

MODULE 1 NOTES 18ELN14/24 BASIC ELECTRONICS  Similarly some holes from the p-type are attracted across the junction to PART 1 combine with electrons on n-type and form the positive ions. SEMICONDUCTOR DIODES AND APPLICATIONS 1.1 P-N Junction  The movement of majority charge carriers across the junction is called as diffusion i.e. from a region of high carrier concentration to a region of low  The pn junction is formed by joining p-type semiconductor and n-type carrier concentration.  The p-type semiconductor and n-type semiconductor are electrically neutral semiconductor.  The holes are the majority charge carriers in p-type semiconductor and the electrons are the majority charge carriers in n-type semiconductor.  The majority charge carriers are uniformly distributed in the semiconductor.  Since holes and electrons are close together at the junction, some free electrons from the n-type are attracted across the junction to fill the adjacent holes on p-type and form the negative ions. before the majority charge carriers diffuse across the junction.  When the negative ions are created on the p-type, the portion close to the junction on p-type acquires a negative voltage.  Similarly when the positive ions are created on the n-type, the portion close to the junction on n-type acquires a positive voltage.  The negative voltage on p-type repels the additional electrons crossing the junction and the positive voltage on n-type repels the additional holes crossing the junction.  This initial diffusion of charge carries creates a voltage at the junction known as barrier voltage.  The magnitude of barrier voltage depends on doping densities, electronic charge and junction temperature.  The barrier voltage opposes the flow of majority carriers across the junction but assists the flow of minority carriers across the junction.  The movement of majority charge carriers across the junction leaves a layer on each side that is depleted of charge carriers. This region is known as depletion region. Fig.1.1: pn junction Prepared by: Prof. Jayaprasad K M, Prof. Vinay H S, Prof. Dayanand G K. Page 3

Text from page-4

MODULE 1 NOTES 18ELN14/24 BASIC ELECTRONICS  On n-type the depletion region consists of donor impurity and on p-type the depletion region consists of acceptor impurity.  If the semiconductors have equal doping densities, then the depletion layers on each side have same widths.  Only a small amount of reverse voltage is sufficient to sweep all the available minority carriers across the junction.  Increase in the bias voltage further does not increase the current level and this current is known as reverse saturation current.  If the p-type semiconductor is highly doped than n-type, then the depletion layer penetrates more deeply into n-type. Similarly if the n-type semiconductor is highly doped than p-type, then the depletion layer penetrates more deeply into p-type. 1.1.1 Biased junction  When an external voltage is applied to a pn junction, the pn junction is said to be biased. 1.1.2 Reverse-biased junction Fig.1.2: Reverse-biased  When the positive terminal is connected to n-type and negative terminal is connected to p-type, the electrons from the n-type are attracted to the positive 1.1.3 Forward-biased junction terminal and holes from the p-type are attracted to the negative terminal.  When the positive terminal is connected to p-type and negative terminal is  This widens the depletion region and the barrier voltage increases. connected to n-type, the electrons from the n-type are repelled from the  When barrier voltage increases there is no possibilities of majority carrier negative terminal and holes from the p-type are repelled from the positive current flow across the junction and the junction is said to be reverse biased and have a high resistance.  During the reversed biased condition the minority carriers on each side can still cross the junction. terminal.  This reduces the width of the depletion region and the barrier potential.  When the applied bias voltage increased the barrier voltage decreases and it disappears. The majority charge carriers can easily flow across the junction.  The movement minority carriers across the junction results in small reverse current. Prepared by: Prof. Jayaprasad K M, Prof. Vinay H S, Prof. Dayanand G K. Page 4

Lecture Notes