×

Close

- DIGITAL LOGIC DESIGN - DESIGN
- Note
**uttar pradesh technical university - uptu**- Electronics and Communication Engineering
- B.Tech
**795 Views**- 16 Offline Downloads
- Uploaded 5 months ago

1 DIGITAL LOGIC DESIGN (REC-301) B.Tech 2nd Year (EC & CS Branch) Mr. Navneet Pal Assistant Professor Electronics & Communication Department Syllabus Digital Logic Design (REC-301) Digital Logic Design (REC-301) By: Navneet Pal ( Assistant Professor)

2 Unit I II III IV V Topic Digital System And Binary Numbers: Number System and its arithmetic , Signed binary numbers, Binary codes, Cyclic codes, Hamming Code, the map method up to five variable, Don’t care conditions, POS simplification, NAND and NOR implementation, Quine Mc-Clusky method (Tabularmethod). Combinational Logic: Combinational Circuits: Analysis Procedure, Design procedure, Binary adder -subtractor, Decimal adder, Binary multiplier, Magnitude comparator, Multiplexers, Demultiplexers, Decoders, Encoders. Sequential Logic And Its Applications : Storage elements: latches & flip flops, Characteristic Equations of Flip Flops, Flip Flop Conversion, Shift Registers, Ripple Counters, Synchronous Counters, Other Counters: Johnson & Ring Counter. Synchronous & Asynchronous Sequential Circuits Analysis of clocked sequential circuits with state machine designing, State reduction and assignments, Design procedure. Analysis procedure of Asynchronous sequential circuits, circuit with latches, design procedure, Reduction of state and flow table, Race-free state assignment, Hazards Memory & Programmable Logic Devices: Digital Logic Families: DTL, DCTL, TTL, ECL & CMOS etc., Fan Out, Fan in, Noise Margin; RAM, ROM, PLA, PAL; Circuits of Logic Families, Interfacing of Digital Logic Families, Circuit Implementation using ROM, PLA and PAL; CPLD and FPGA. Digital Logic Design (REC-301) By: Navneet Pal ( Assistant Professor)

3 UNIT-1 Digital System And Binary Numbers: Number System and its arithmetic Signed binary numbers Binary codes Cyclic codes, Hamming Code The map method up to five variable Don’t care conditions, POS simplification, NAND and NOR implementation, Quine Mc-Clusky method (Tabularmethod). Digital Logic Design (REC-301) By: Navneet Pal ( Assistant Professor)

4 Very Short Questions and Answers Q1. What are weighed codes? Give examples. Ans: The weighed codes are the codes that have assigned weights or values for each bit position. A code in which each bit position has a certain numeric value assigned. Several such codes exist, such as 8-4-2-1, 7-4-2-1, 6-3-1 -1, Excess – 3 code. Q2. What are cyclic codes? Ans: An (n, k) linear code C is called a cyclic code if any cyclic shift of a codeword is another codeword. That is, Q3. What are self complementing codes? Ans: A self-complementing code is the one in which the members of the number system complement on themselves. This requires the following two conditions to be satisfied. a). The complement of the number should be obtained from that number by replacing 1s with 0s and 0s with 1s. b). The sum of the number and its complement should be equal to decimal 9. Example of a selfcomplementing code is 2-4-2-1 code, Excess-3 code. , BCD code Q4. What are BCD codes? Ans:A special binary code used to directly represent the decimal characters. Each four bit value in BCD represents a single decimal character. Q5. What are alphanumeric codes? Ans: A binary code used to represent the alphabets, numbers and punctuation marks as well as control characters for controlling a printer or display. Eg – ASCII, EBCD Q6. What is an Excess – 3 code? Ans: A self complementing code used to represent BCD numbers. It is self complementing because the 1’s complement is also the 9’s complement of the BCD number. It is widely used in BCD arithmetic circuits. Examble: 1000 of 8421 = 1011 in Excess-3 Q7. What is a Gray code? (or) What is a unit distance code? Give an example Ans:A reflective, unit distance code where only one bit position changes for each adjacent change in value. Q8 What is a reflective code? Ans: A code is said to be reflective when code for 9 is complement for the code for 0, and so is for 8 and 1 codes, 7 and 2, 6 and 3, 5 and 4. Codes 2421, 5211, gray and excess-3 are reflective, whereas the 8421 code is not. Q9. What is meant by parity bit? Digital Logic Design (REC-301) By: Navneet Pal ( Assistant Professor)

## Leave your Comments