×
Everything you do now is for your future. Think About that.
--Your friends at LectureNotes
Close

Note for Applied Chemistry - CHEM by Dheeru Sharma

  • Applied Chemistry - CHEM
  • Note
  • Dr. A PJ Abdul Kalam Tech University Lucknow - AKTU
  • 12 Views
  • Uploaded 4 months ago
Dheeru Sharma
Dheeru Sharma
0 User(s)
Download PDFOrder Printed Copy

Share it with your friends

Leave your Comments

Text from page-2

Soap(Sodium stearate) (Hardness) Magnesium stearate(Insoluble ppt.)) Q 3.Why hardness is measured in terms of CaCO3 Equivalents? Give the relationship between various units of hardness. Ans. Hardness is expressed in terms of equivalents of CaCO3 (also known as Degree of hardness) because:  The molecular weight of CaCO3 is 100 , which makes calculations easy.  It is the most insoluble salt that can be precipitated in water treatment. Units of Hardness: • Milligrams per liter (mg/litre) 1ppm=1 part of CaCO3 equivalence hardness causing substance present in 106 parts of water • Milligrams per liter (mg/litre) 1mg/L=1mg of CaCO3 equivalence hardness causing substance present in one liter of water • Clare's Degree(oCl) 1o Clarke= 1part of CaCO3 equivalent hardness in 70000 parts of water • Degrees French (oFr) 1o Fr = 1 part of CaCO3 equivalent hardness per 105 parts of water • Milliequivalent per liter (milli eq./litre) 1milli eq./L= 50 mg of CaCO3 equivalence hardness Relationship between various units: 1mg/L = 1ppm = 0.1 oFr = ( milligrams ( parts per (degree per liter) million) French) 0.07oCl = (degree Clarke) 0.02 millieq./litre ( milliequivalent per liter ) Q.4. Explain zeolite method of water softening. Explain advantages and disadvantages of Zeolite process . Ans. Zeolite process or Permutit process : Zeolites are the hydrated sodium alumino silicate . The artificial zeolite is called permutit having the formula: Na2O. Al2O3. X SiO2 n H 2O (X= 2-10, n = 2-6 ) Process:  Hard water is passed through the zeolite bed at a specified rate.  The hardness causing ions such as Ca2+, Mg2+ are retained by the zeolite bed as CaZe and MgZe respectively.  Sodium salts are released during the reaction, as byproduct. 2

Text from page-3

 The following reactions takes place during softening process: Regeneration: Exhausted zeolite is regenerated by treating the with a concentrated Brine solution(10% NaCl). CaZe + 2 NaCl Na2Ze + CaCl2 MgZe + 2 NaCl Na2Ze + MgCl2 Exhausted Active zeolite zeolite Advantages: i. It removes the hardness completely and water of about 10 ppm hardness is produced. ii. The equipment used is compact, occupying a small space. iii. No impurities are precipitated, so there is no danger of sludge formation . iv. It requires less time for softening. v. It requires less skill for maintenance as well as operation. Disadvantages: i. The treated water contains more sodium salts than in lime-soda process. ii. This method causes caustic embrittlement. iii. High turbidity water cannot be treated efficiently by this method. Q.5 Explain ion exchange resin method. Explain advantages and disadvantages of this process. Ans. Ion Exchange Resin Method :  Ion exchange process also known as demineralization or de-ionization process.  In ion exchange process all the ions present in water are eliminated by using ion-exchange resins.  Ion-Exchange resins are insoluble cross linked long chain organic polymers with a micro porous structure, and the “functional Groups” attached to the chains are responsible for the ion-exchanging properties.  Ion exchange resins are classified as:  Cation Exchange Resins- Resins with acidic functional group are capable of exchanging H+ ions with other cations.  Anion Exchange Resins- Resins with basic functional groups are capable of exchanging OH- ions with other anions. Principle:  Hard water is allowed to pass through cation exchange resins, which remove Ca+2 and Mg+2 ions and exchange equivalent amount of H+ ions. Cation Exchange Resins 2RH+ + Ca+2 R2Ca + 2H+ + +2 2RH + Mg R2Mg + 2H+  After cation exchange resin , the water is passed through anion exchange column which removes all the anions like Cl- ,SO4-2 etc. and equivalent amount of OH- ion is released from this column to water. 3

Text from page-4

Anion Exchange Resins R’OH + ClR’Cl + OH2R’OH + SO4-2 R2SO4+ 2OH H+ and OH- ions, thus released in water from respective cation and anion exchange columns, get combined to produce water molecules. H+ + OHH2O Regenration:  The exhausted cation exchanger is regenerated by passing it through dilute sulphuric acid. R2Ca+2 + 2H+ 2RH+ + Ca+2 Exhausted cation resin  The exhausted anion exchanger is regenerated by passing a dilute solution of NaOH. R2SO4-2 + 2OH2R’OH- + SO4-2 Exhausted anion resin Fig: Demineralization of water Merits of Ion-exchange process: i. The process can be used to soften highly acidic or alkaline water. ii. It produces water of very low hardness (2 ppm) Demerits of Ion-exchange process: i. The equipment is costly and more expensive chemicals are needed. ii. If water contains turbidity, the output of the process is reduced. Q. 6 Discuss the lime -soda method. Explain advantages and disadvantages of this methods. Ans. It is a process in which Lime (Ca(OH)2) and soda (Na2CO3) are added to the hard water to convert the soluble calcium and magnesium salts to insoluble compounds by a chemical reaction. The CaCO3 and Mg(OH)2 so precipitated are filtered off and removed easily. Ca HCO 3 2  Ca OH2  2CaCO 3  2H 2 O MgCl 2  Ca OH2  MgOH2  CaCl 2 4

Text from page-5

CaCl 2  Na 2CO3  CaCO 3  2NaCl The Lime-Soda process may be classified into two groups : (i) Cold lime - Soda process (ii) Hot lime - Soda process Cold lime – Soda process:  In this process softening of water is carried out at room temperature by adding lime and soda.  A small amount of coagulant like alum is added to precipitate finely divided precipitates of CaCO3 and Mg(OH)2 . NaAlO2 + 2H2O NaOH + Al(OH)3 Sodium aluminate Al2(SO4)3 + 3 Ca(HCO3)2 2Al(OH)3 + CaSO4 + CO2 Aluminium sulphate Fig. Cold lime - Soda Plant Hot lime - Soda process:  In this process hard water and softening chemicals are heated near about the boiling point of water.  No coagulant is needed in this process.  The reactions are much faster and rapid .  Hot lime-soda plant consist of three parts: i. Reaction tank: water, chemicals and steam are mixed ii. Conical sedimentation tank : sludge settles down iii. Sand filter : complete removal of sludge from the soft water is ensured 5

Lecture Notes