×
its time to be "SERIOUS".
--Your friends at LectureNotes
Close

Lab Manuals for Material Testing - MT By shweta sharma

  • Material Testing - MT
  • Practical
  • Dr. A.P.J. Abdul Kalam Technical University - AKTU
  • Mechanical Engineering
  • 500 Views
  • 24 Offline Downloads
  • Uploaded
Shweta Sharma
Shweta Sharma
0 User(s)
Download PDFOrder Printed Copy

Share it with your friends

Leave your Comments

Text from page-1

Handbook of Material Testing

Text from page-2

Table of Contents 1. Tests on Cement 1.1 Fineness 1 1.2 Consistency 3 1.3 Initial and final setting time 5 1.4 Soundness 7 2. Tests on Aggregates 2.1 Sieve analysis 9 2.2 Water absorption 13 2.3 Aggregate abrasion value 15 2.4 Aggregate impact value 18 2.5 Aggregate crushing value 21 3. Tests on Fresh Concrete 3.1 Workability 23 3.1.1 Slump 23 3.1.2 Compacting factor 25 3.1.3 Vee-Bee 27 4. Tests on Hardened Concrete 4.1 Non-destructive tests 29 4.1.1 Rebound hammer 29 4.1.2 Ultrasonic pulse velocity 31 4.2 Compression test 34

Text from page-3

5. Tests on Soil 5.1 Water content 38 5.1.1 Oven drying method 38 5.1.2 Calcium carbide method 41 5.2 Particle size distribution 44 5.3 Liquid limit 47 5.4 Plastic limit 50 5.5 Free swell index 52 5.6 Specific gravity 54 5.7 Maximum dry density and optimum moisture content 57 5.8 In-situ dry density 61 5.8.1 Core cutter method 61 5.8.2 Sand replacement method 63 6. Tests on Blanket Material 68 7. Tests on Bitumen 7.1 Bitumen content 72 7.2 Specific gravity 74 7.3 Marshall stability 76 7.4 Penetration 78 7.5 Flash point and fire point 80 7.6 Softening point 7.7 Ductility 83 86 ANNEXURES List of suppliers of material testing equipments alongwith their addresses 89 to 99 100

Text from page-4

1. TESTS ON CEMENT 1.1 FINENESS AIM To determine the fineness of cement by dry sieving as per IS: 4031 (Part 1) - 1996. PRINCIPLE The fineness of cement is measured by sieving it through a standard sieve. The proportion of cement, the grain sizes of which, is larger than the specified mesh size is thus determined. APPARATUS FIG. 1 : IS SIEVE i) 90µm IS Sieve ii) Balance capable of weighing 10g to the nearest 10mg iii) A nylon or pure bristle brush, preferably with 25 to 40mm bristle, for cleaning the sieve 1

Lecture Notes